e-steki User ModLog v1.1.3 - An alternative to moderation AutoPM

[Lea Verou]

A big thanks to everyone who nominated or voted this for MOTM September 2007!
e-steki User ModLog


What is this about?
This modification shows the user a table in his UserCP with the latest moderator actions that are performed in his posts/threads.

1. Why this and not Moderation Auto-PM (https://vborg.vbsupport.ru/showthread.php?t=115677)?
Its not intruding for the user. In fact, I decided to make this because the Moderation Auto-PMs I was receiving by tons were too annoying to bare.
Its not in the Modification Graveyard, so there is a much higher chance of updates and support ;-P
It allows more types of actions to show (unfortunately exept hard deletes).
Its more visually appealing ;-)
Users have to make more clicks to discuss an issue with the moderator, which makes it a little harder for them to protest ;-)
Most forums have some "moderation routines" that involve many moderator actions. Especially in this case MAP can be REALLY annoying.
You can select to hide the Moderator column, so no hatred will begin after the action as the user will not know who performed it.2. FeaturesAdmin Features
Absolutely NO template modifications and you even get to control where the table will be placed in the UserCP with a simple setting!
Ability to hide who the moderator that performed the action was.
Fully phrased.
Your moderators will not see their own actions, but the actions performed by other moderators on their posts/threads (customizable).
You get to control which action types will be shown and how many of them.
Ability to set a cutoff limit, so that actions that are performed before X days will not show.
Ability to specify which mod/admin usergroups' actions will display.
Displays actions from the moment you install it, even old ones, it doesn't display only the actions that are performed afterwards.
Supports e-steki Featured threads (https://vborg.vbsupport.ru/showthread.php?t=155299).
A nice, usable and extensive manual instead of an ugly readme.txt ;-)End user Features
Easy spotting of the action type by the nice colorful small icons (provided by famfamfam.com (http://www.famfamfam.com/). Thanks!)
Actions that were performed after the user's last visit will display in bold. Of course, they are sorted according to the date and time they were performed.
There is a link to the thread that the action is about. If the action is about a post, then the link takes the user to that specific post. There is also a link for the forum that contains that thread, in case the user does not remember what it is.
The table is collapsible, and if it has nothing to display it doesn't show, just like the other tables in the UserCP.
The username of the Moderator (if the admin has selected him to show) is formatted according to usergroup and links to his profile (so the member can send him a pm to talk about it, if he wishes to do so)
Full date and time displayed.Don't forget to Mark as Installed!
Support will be provided only for a few days after each release.
Thanks a lot to famfamfam.com for the icons and to SirAdrian for his answers to my questions.

As the admincp screenshot was resized by those stupid attachment limits that Paul M refuses to change, here is the original one:
http://www.e-steki.com/myfiles/Michelle/eum_admincp.gif

[Lea Verou]

First post reserved.

[JD45]

Oooo..Oooo...2nd post..:p

Thanks for the hack, looks outstanding. I'll get it installed today and ditch the other one I'm using.

[Jon_Simmonds]

Third post reserved :P

Looks good will give it a go on my test board :)

[Lea Verou]

Tell me what happened please :)
(Btw I may not reply immediately, as I'm going to sleep shortly, its 1:00 AM here)

[Zaiaku]

Looks interesting. I'll keep an eye on this for my new site.

[JD45]

Got it installed w/o any problems. I adjusted the settings in vboptions, went an moderated one of my own topics, checked the usercp but didn't see a listing of any sort. I did turn on that option in the main options. Also, checked to see if the hook was present and it was.

I check over things once more to be sure I did everything right.

Edit: Posted a new thread, close, stuck, soft deleted and nothing new in the usercp?

[Lea Verou]

Have you got the setting "Show actions that the same user has performed?" to Yes? (default is no)
Otherwise your own actions will not show.

What moderation action did you perform?

[JD45]

Have you got the setting "Show actions that the same user has performed?" to Yes? (default is no)
Otherwise your own actions will not show.

What moderation action did you perform?

Yes, and I closed, pinned, soft deleted and finally hard deleted. Also, I have all those action id's put in the settings as well.

[Lea Verou]

You are not supposed to put them there!
You put there only the ones you DON'T want to show! (I would be a sadist if the setting was the opposite way :p)

[JD45]

You are not supposed to put them there!
You put there only the ones you DON'T want to show!
DOH!!!

I went too fast...everything works fine! :D

[Lea Verou]

DOH!!!

I went too fast...everything works fine! :D
:) :) :)
Finally, a mod I released with no bugs! :D
Now I can go sleep in peace :)

[Lea Verou]

Why did you edit your post again? Is there any new problem?

edit: Phew, he re-edited :)

[EnIgMa1234]

Nice job Michelle :D

[FreshFroot]

pretty good hack Michelle, you have some nice new hacks out this week. Keep it up girl!!

[johnrizz]

I have a dumb question as I hang my head in shame! Where can I find those action id's?
thanks...

[JD45]

I have a dumb question as I hang my head in shame! Where can I find those action id's?
thanks...

Look in the readme the hack came with....they're near the bottom. 1-31

[Rickeo]

bloomin amazing loving this you have outdone yourself on this on thank you so much :D

[NFLfbJunkie]

Very sweet addition to my forums. Great job.

[NFLfbJunkie]

Action #18 "Post x by y removed" did not work for me. I removed a post on a test user account, and when I logged on as the test user, this action did not show up in the CP.

[Konstantinos]

Action #18 "Post x by y removed" did not work for me. I removed a post on a test user account, and when I logged on as the test user, this action did not show up in the CP.

make sure u add the mod id in the settings of the hack

[NFLfbJunkie]

I test Action #15 - "Thread removed", which is not listed in the "
Actions you do NOT want the user to be notified of" in the control panel, and it worked. So I don't think adding #18 fixes this.

[JD45]

make sure u add the mod id in the settings of the hack

No, you don't add anything. You only put in what actions you DON'T want to show. Same mistake I made.

BTW: Nominated for MOTM.

[Lea Verou]

BTW: Nominated for MOTM.

Thank you so much!!!! :D

@Junkie: unfortunately it doesn't display hard deletes, only soft deletes, as I mentioned in the first post and the manual. This is caused due vBulletin's way of updating the moderator log (my hack fetches the actions from the moderator log filtered by the userid of the thread/post poster). This might be fixed in a future version, if I think of a way to do it.

[Lea Verou]

I have a dumb question as I hang my head in shame! Where can I find those action id's?
thanks...

They are in the manual, in a pretty table :p
Note what JD45 said though, you should put there only the ones that you want to prevent from showing.
Perhaps in a future version I can make this setting more user friendly.

[Gray Matter]

This hack is amazing! Uninstalled Moderation Auto-PM and installed this one, and it's working perfectly. ;)

Very quick install and so easy, too. :p

[Wulfnoth]

There is no link in the usercp of my forum. maybe because i have customized the templates? can you please release the manual template-edits for this mod?

[winduff]

looks great, but I receive an mySQL Error when accessing the UserCP!

Database error in vBulletin 3.6.7:

Invalid SQL:

SELECT
modlog.moderatorlogid as id,
modtable.username as moderator,
modtable.usergroupid as modgroup,
modlog.userid as modid,
modlog.action as action,
modlog.type as type,
modlog.dateline as dateline,
modlog.threadid as threadid,
modlog.postid as postid,
editlog.postid as editpostid,
forum.forumid as forumid,
thread.title as threadtitle,
forum.title as forumtitle,
deletionlog.reason as delreason,
editlog.reason as editreason
FROM moderatorlog AS modlog
LEFT JOIN user AS modtable ON (modtable.userid = modlog.userid)
LEFT JOIN thread AS thread ON (thread.threadid = modlog.threadid)
LEFT JOIN post AS post ON (post.postid = modlog.postid)
LEFT JOIN forum AS forum ON (IF(modlog.forumid,forum.forumid = modlog.forumid,forum.forumid = thread.forumid))
LEFT JOIN deletionlog AS deletionlog ON (deletionlog.primaryid = IF(deletionlog.type = 'post', modlog.postid, modlog.threadid))
LEFT JOIN editlog AS editlog ON (IF(modlog.postid OR modlog.type!=20,editlog.postid = modlog.postid,editlog.dateline = modlog.dateline AND editlog.userid = modlog.userid))
WHERE
IF(modlog.postid>0,post.userid=1,thread.postuserid=1) AND modtable.userid != 1 AND modlog.type NOT IN (11,12)
ORDER BY modlog.dateline DESC
LIMIT 10;

MySQL Error : The SELECT would examine more than MAX_JOIN_SIZE rows; check your WHERE and use SET SQL_BIG_SELECTS=1 or SET SQL_MAX_JOIN_SIZE=# if the SELECT is okay
Error Number : 1104
Date : Sunday, August 12th 2007 @ 08:24:39 AM
Script : .../usercp.php
Referrer : .../index.php
IP Address : 82.113.106.16
Username : Chris
Classname : vb_database

[Lea Verou]

There is no link in the usercp of my forum. maybe because i have customized the templates? can you please release the manual template-edits for this mod?

Probably. Tell me where you want it to appear and I'll tell you the template edit for it. Also ensure you are running vB 3.6.8.

looks great, but I receive an mySQL Error when accessing the UserCP!

This is a rather difficult issue. The product may be only adding one query, but that query is a rather heavy one. Your server either doesn't support such a large query, or you have a too large forum, so the limit is logical. I'm working on it, perhaps I'll make the product add 2 queries instead of one but much lighter ones. Keep your eyes open for an update (probably it will be released soon), and for the time being, disable the product.

[Lea Verou]

Version 1.1
----------------
Added option for specifying a days limit for the display of actions.
You are strongly advised to upgrade, as this option makes the query much lighter for the server.

winduff try this version, and set the day limit to a relatively low number (equal or less to 30). Tell me if your problem was solved.

[Wulfnoth]

Probably. Tell me where you want it to appear and I'll tell you the template edit for it. Also ensure you are running vB 3.6.8.
I want the link appear above the PM-section.

[johnrizz]

Look in the readme the hack came with....they're near the bottom. 1-31

(DUH) my bad! lol....:D

[AzzidReign]

Awesome mod!!!!! I love it!

[Axel Foley]

Lea,

this is a really good hack...thank you for your work...:)

The only thing I can tell you is that the "edit post" action (#20) is not working for me.

I have emptied the relevant field in the options in order to log EVERY action. ;)

Have you tested all the actions?

Thanks again...hack of the month for me...;)

[Lea Verou]

I discovered a bug with action #20, about an hour ago. It notifies the thread starter instead of the post poster.
Unfortunately, this means that I'll have to rewrite a great portion of the code, due to vB's crappy moderator logging on post edits :mad: (In fact I reported that as a bug to vbulletin.com, it does not store the postid in the moderatorlog on post edit).
I thought I had got over that bug in my code, but it seems I've missed something.

So, I'm currently rewritting the queries in order to overcome that problem.
Support will be temporarily not provided, so that I can focus on fixing the problem.
You'll have to wait a little bit.
I expect to release a fixed version later today or tomorrow at most.
Sorry and thanks for your patience and kind words :)

PS: Of course all the other actions are working fine, the problem is with post edits (action 20)

[MrZeropage]

very nice and useful, thanks :)

[COBRAws]

More screens please?

How does a user start a conversation with the staff member who moderated his/her post?

[NFLfbJunkie]

After installing is there supposed to be a link to show the actions from within the USERCP, or do actions only show when they have been made? I don't see a link anywhere in my USERCP.

[Lea Verou]

@COBRAws:
There is nothing else in the hack that can be displayed in a screenshot.
As for the conversation, he can go to his/her profile (if the moderator column is selected to be displayed) and start a PM one, the old fashioned way. :p

@Junkie:The table shows only if there are any actions for it to show, and it shows in the usercp home. Ensure there is something for it to show.

[winduff]

Hey Michelle,

cheers for updating so fast. Unfortunatly, I still get the same error. I guess my server doesn't support such a large query - I even set it down to 5 days max, no positive results...

I'll wait and see, maybe you'll come up with something :)

Cheers

[Lea Verou]

Version 1.1.1
------------------
Fixed the action 20 (edit post) bug

Also the manual now contains instructions for manual addition of the template hooks if you don't have them and a simple tutorial for changing the icons associated with each action type.

@Wulfnoth: The template edits that you requested are now included in the manual ;)
@winduff: Try this one, now the queries are two (one if you exclude action 20 from showing) but much lighter ones. If it doesn't work, answer the following (if its private info for you, answer in a pm):
1. How big is your forum? (users, posts, threads)
2. Are you on a shared server?
3. If you know how to navigate through phpmyadmin, how large is the moderatorlog table and the deletionlog table?

[Wulfnoth]

@Wulfnoth: The template edits that you requested are now included in the manual ;)
Thanks!

[Lea Verou]

Version 1.1.2
---------------------
Added setting to specify which mod/admin usergroups' actions will display

[winduff]

Michelle, your a genious!

All works fine, great mod ;) Thanks again so much!

[Lea Verou]

Thank you winduff :)
I'm glad it finally works for you. :)

A note to non-coders: Don't pay so much attention to the number of queries that a hack adds, but rather the type of them. I tried so hard to make this add only one query initially, and it turned out to be such a heavy one that it couldn't even be executed in winduff's installation! Now that there are 2 queries (if you want to display post edits, otherwise its still one) they are much lighter together than the previous one alone. ;)

[Axel Foley]

Good job Lea...;)

While doing the tests I could "feel" the difference between this version and the old one...it's faster...you made a good job on the queries.

I would also suggest you to add an option: Show empty modlog table? (default: No)

I think this one deserves the nomination...;)

[Lea Verou]

Good job Lea...;)

While doing the tests I could "feel" the difference between this version and the old one...it's faster...you made a good job on the queries.

I would also suggest you to add an option: Show empty modlog table? (default: No)

I think this one deserves the nomination...;)
Tell me one reason why someone would want to set that option to yes and I'll add it ;)

Thanks so much for the nomination!!! https://vborg.vbsupport.ru/https://vborg.vbsupport.ru/

[Gray Matter]

Wow, I didn't even realize how heavy the old version was until I updated to the new one. It cut my page load from 4.71432 seconds to 0.46639 seconds. :eek:

[Lea Verou]

Yeah, version 1.0 was quite heavy.

This could be a lesson to some that the number of queries that a hack adds by itself doesn't always reflect how heavy the hack is. In this case, as was proven, 2 queries were far better than one. ;)

[Essam]

its working great for my forum thank you

can you make the same idea for ( reported posts ) ?
only moderators forum can view the complaints in the usercp

[johnrizz]

That was quick and It works great! keep up the good work.....

[MrZeropage]

good work on the update *thumbs up*

btw you should update your signature to v1.1.2 too ;)

[cynthetiq]

It's late I thought I'd get one more mod in before bed, and I picked yours because Karma is so awesome. I think this looks awesome too.

For some reason, this isn't showing up in the CP.

I am now using the enlighten template and also did the GTUserCP - Enhanced USERCP Interface + USERCP Menu mod as well if that makes differences.

your FAQ is quite thorough, so I looked at the ""$template_hook[usercp_main_pos1]" (or pos2-6, depending on which position you have selected)" and I see that I'm already using all of them.

$template_hook[usercp_main_pos1]
<if condition="$show['privatemessages']">
<!-- ############## PRIVATE MESSAGES ############## -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<thead>
<tr>
<td class="tcat" colspan="2">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('usercp_pms')"><img id="collapseimg_usercp_pms" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_usercp_pms].gif" alt="" border="0" /></a>
<a href="private.php$session[sessionurl_q]">$vbphrase[new_private_messages]</a><span class="normal">: ($numpms)</span>
</td>
</tr>
</thead>
<tbody id="collapseobj_usercp_pms" style="$vbcollapse[collapseobj_usercp_pms]">
$messagelistbits
</tbody>
</table>
<br />
<!-- ############## END PRIVATE MESSAGES ############## -->
</if>
$template_hook[usercp_main_pos2]
<!-- ############## SUBSCRIBED THREADS ############## -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<thead>
<tr>
<td class="tcat" colspan="$subscribedthreadscolspan">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('usercp_subthreads')"><img id="collapseimg_usercp_subthreads" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_usercp_subthreads].gif" alt="" border="0" /></a>
$vbphrase[new_subscribed_threads]<span class="normal">: ($numthreads)</span>
</td>
</tr>
</thead>
<tbody id="collapseobj_usercp_subthreads" style="$vbcollapse[collapseobj_usercp_subthreads]">
<if condition="$show['threads']">
<tr class="thead">

<if condition="$show['threadicons']">
<td class="thead" colspan="2">&nbsp;</td>
<else />
<td class="thead">&nbsp;</td>
</if>

<td class="thead" width="100%">$vbphrase[thread] / $vbphrase[thread_starter]</td>
<td class="thead" width="150" align="center" nowrap="nowrap">$vbphrase[last_post]</td>
<td class="thead" align="center">$vbphrase[replies]</td>
<td class="thead" align="center">$vbphrase[views]</td>
</tr>
$threadbits
<else />
<tr>
<td class="alt1" align="center" colspan="$subscribedthreadscolspan"><strong>$vbphrase[no_subscribed_threads_to_display]</strong></td>
</tr>
</if>
<tr>
<td align="$stylevar[right]" colspan="$subscribedthreadscolspan" class="tfoot">
<span class="smallfont"><a href="subscription.php?$session[sessionurl]do=viewsubscription&amp;folderid=all">$vbphrase[view_all_subscribed_threads]</a></span>
</td>
</tr>
</tbody>
</table>
<br />
<!-- ############## END SUBSCRIBED THREADS ############## -->
$template_hook[usercp_main_pos3]
<if condition="$show['forums']">
<!-- ############## SUBSCRIBED FORUMS ############## -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<thead>
<tr>
<td class="tcat" colspan="<if condition="$vboptions['showmoderatorcolumn']">6<else />5</if>">
<a style="float:$stylevar[right]" href="#top" onclick="return toggle_collapse('usercp_forums')"><img id="collapseimg_usercp_forums" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_usercp_forums].gif" alt="" border="0" /></a>
$vbphrase[subscribed_forums]
</td>
</tr>
</thead>
<tbody id="collapseobj_usercp_forums" style="$vbcollapse[collapseobj_usercp_forums]">
<tr align="center" valign="bottom">
<td class="thead" width="2%">&nbsp;</td>
<td class="thead" align="$stylevar[left]" width="80%">$vbphrase[forum]</td>
<td class="thead">$vbphrase[last_post]</td>
<td class="thead">$vbphrase[threads]</td>
<td class="thead">$vbphrase[posts]</td>
<if condition="$vboptions['showmoderatorcolumn']">
<td class="thead" width="20%">$vbphrase[moderator]</td>
</if>
</tr>
$forumbits
</tbody>
</table>
<br />
<!-- ############## END SUBSCRIBED FORUMS ############## -->
</if>
$template_hook[usercp_main_pos4]
<if condition="$show['infractions']">
<!-- ############## NEW INFRACTIONS ############## -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<thead>
<tr>
<td class="tcat" colspan="7">
<span class="smallfont" style="float:$stylevar[right]">
<phrase 1="$bbuserinfo[ipoints]">$vbphrase[x_points_total]</phrase>
&nbsp; &nbsp;
<a href="#top" onclick="return toggle_collapse('usercp_infraction')"><img id="collapseimg_usercp_infraction" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_usercp_infraction].gif" alt="" border="0" /></a>
</span>
$vbphrase[latest_infractions_received]
</td>
</tr>
</thead>
<tbody id="collapseobj_usercp_infraction" style="$vbcollapse[collapseobj_usercp_infraction]">
<tr>
<td class="thead">&nbsp;</td>
<td class="thead">$vbphrase[post]</td>
<td class="thead">$vbphrase[date]</td>
<td class="thead">$vbphrase[expires]</td>
<td class="thead" nowrap="nowrap">$vbphrase[points]</td>
<td class="thead">$vbphrase[reason]</td>
<td class="thead" nowrap="nowrap">$vbphrase[posted_by]</td>
</tr>
$infractionbits
</tbody>
</table>
<br />
<!-- ############## END NEW INFRACTIONS ############## -->
</if>
$template_hook[usercp_main_pos5]
<if condition="$show['reputation']">
<!-- ############## NEW REPUTATION ############## -->
<table class="tborder" cellpadding="$stylevar[cellpadding]" cellspacing="$stylevar[cellspacing]" border="0" width="100%" align="center">
<thead>
<tr>
<td class="tcat" colspan="$reputationcolspan">
<span class="smallfont" style="float:$stylevar[right]">
<phrase 1="$bbuserinfo[reputation]">$vbphrase[x_points_total]</phrase>
&nbsp; &nbsp;
<a href="#top" onclick="return toggle_collapse('usercp_reputation')"><img id="collapseimg_usercp_reputation" src="$stylevar[imgdir_button]/collapse_tcat$vbcollapse[collapseimg_usercp_reputation].gif" alt="" border="0" /></a>
</span>
$vbphrase[latest_reputation_received]
</td>
</tr>
</thead>
<tbody id="collapseobj_usercp_reputation" style="$vbcollapse[collapseobj_usercp_reputation]">
<tr>
<td class="thead">&nbsp;</td>
<td class="thead">$vbphrase[thread]</td>
<td class="thead">$vbphrase[date]</td>
<if condition="$vboptions['showuserraters']">
<td class="thead" nowrap="nowrap">$vbphrase[posted_by]</td>
</if>
<td class="thead">$vbphrase[comment]</td>
</tr>
$reputationcommentbits
</tbody>
</table>
<br />
<!-- ############## END NEW REPUTATION ############## -->
</if>
$template_hook[usercp_main_pos6]
<table cellpadding="0" cellspacing="0" border="0" width="100%">
<tr>
<td width="100%">&nbsp;</td>
<td align="$stylevar[right]">$forumjump</td>
</tr>
</table>

[FReeSTER]

Thank you Michelle. Works great with vb version 3.6.5 :)

**INSTALLED**

[Lea Verou]

its working great for my forum thank you

can you make the same idea for ( reported posts ) ?
only moderators forum can view the complaints in the usercp
I didn't understand, can you explain your idea in more detail? :)

It's late I thought I'd get one more mod in before bed, and I picked yours because Karma is so awesome. I think this looks awesome too.

For some reason, this isn't showing up in the CP.

I am now using the enlighten template and also did the GTUserCP - Enhanced USERCP Interface + USERCP Menu mod as well if that makes differences.

your FAQ is quite thorough, so I looked at the ""$template_hook[usercp_main_pos1]" (or pos2-6, depending on which position you have selected)" and I see that I'm already using all of them.

Firstly ensure that there is something to be shown. Eg make a moderator of yours perform an edit on one of your posts, or turn the option "Show self actions" to yes and perform a moderating action on your posts yourself.
If none of this work, post a screenshot of your settings.

good work on the update *thumbs up*

btw you should update your signature to v1.1.2 too ;)
LOL thanks, I'm so forgetful all the time :o

Thanks to everyone else who installed or nominated as well :) :)

[Axel Foley]

Tell me one reason why someone would want to set that option to yes and I'll add it ;)

Thanks so much for the nomination!!! https://vborg.vbsupport.ru/https://vborg.vbsupport.ru/

Because there are people like me who don't like dynamic sections on a page appearing. I like the structure of a page being always the same and the data to be dynamic, don't like a table appearing only when there's data...:)

It would also solve you lots of problems telling users of this hack that can't see the table to make sure there's data...if they enable the option to always display the table even with empty data and the table in usercp doesn't come up, the problem is in the template part, not the data collection part of the hack...useful for debugging...:)

I gave you 2 reasons...please provide us this other option...:)

Ciao!

[Lea Verou]

Lol ok, you convinced me :D
I'll add it today ;)

[cynthetiq]

Firstly ensure that there is something to be shown. Eg make a moderator of yours perform an edit on one of your posts, or turn the option "Show self actions" to yes and perform a moderating action on your posts yourself.
If none of this work, post a screenshot of your settings.

I dunno if it was because I was sleepy or what but it works as expected.

I was looking for it to appear as a menu option the left side as a selection and then a popup window.

Of course as I made more actions, it grew and I could see it plain as day.

Lesson: I shouldn't add mods and look at code when I'm sleepy.

Thanks this is AWESOME!

[Lea Verou]

Its normal to be confused, as a 700x700 attachment limit doesn't allow much detail in the screenshots :mad:
Thanks cynthetiq :)

[cynthetiq]

question: I moderated a thread by closing the thread. I then moved the thread to a moderators only forum.

The mod actions then are no longer visible as you described. Is there a simple way to at least show up to the point that the thread was moved to the moderators forum, and that's where the trail ends? Or is that impossible?

This way users will see that the thread was moved, otherwise, once it is moved to a moderator forum there is no way for them to see that it got moved there anylonger.

Am I making sense or am I still sleepy?

[Lea Verou]

I didn't understand a thing :o

[cynthetiq]

HAHAHAHa.... me either

okay if I have a forum that is restricted to registered users, the thread is moved to the restricted forum, the log is emptied since the query no longer allows the member to see the log for the thread.

is it possible to allow it to see the moderation until the move point in the arrow?

the edits I made in the Authorized Personnel Only Forum. then moved it back, once i moved it back I could see all modlog.

I was wondering if it was possible to see just up to the arrow.

[Lea Verou]

I'll try to think of a way, but not now, later.
For the time being, you can select not to apply forum permissions if you wish.

[MrD]

Hi,
nice Hack :D

Thx.

But one Question:
Why the TMS system (http://https://vborg.vbsupport.ru/showthread.php?t=152931) is used by Andreas so rarely or not by the Codern. It brings nevertheless only advantages with installing, since the Template changes is omitted

Sorry for Translation, its from Babelfish :D

[Lea Verou]

Hi,
nice Hack :D

Thx.

But one Question:
Why the TMS system (http://https://vborg.vbsupport.ru/showthread.php?t=152931) is used by Andreas so rarely or not by the Codern. It brings nevertheless only advantages with installing, since the Template changes is omitted

Sorry for Translation, its from Babelfish :D
Dunno, I prefer to write my own plugins for that in order to have more control over it, although from what I've seen I appreciate TMS a lot.
This hack does not require any manual template changes, so why are you asking this in this particular thread?

[MrD]

Hi,
Any Question:
I Edit a Thread from a Moderator, but he not become a Log of this Action.

To the TMS, which was one generally asks, which should not attack you . Separate it went around all Coder. You have also some Hacks, where one must change Templates, which degree is with updates vB depending upon number of installed Hacks much time-consuming.

[Lea Verou]

If you edited his thread, he will see the action in his usercp, not you. ;)

I know I have some hacks that one should change templates, but not my new ones.
I just don't have time to update the old ones.
Btw I was not attacking you, just asking.

[MrD]

Hi,
that i see this not in Modlog is OK, but he don?t see it.
Only Users see a Log in his CP.

The Usergroup is correct in ACP Only 3 Groups are in the field.
5,6,80 (Supermods,Admins,Mods)
on my CP i see a log of all mod actions. but no oone of my mods/SM see anyone in here cp

Admin
68477

Mod with postings/threads how edited by me.
68478

User
68479

[Lea Verou]

Can I have a screenshot of your settings?
Btw the usergroupid of mods is usually 7, not 80.

@Axel Foley, sorry, I didn't find the time to add the setting today, so you 'll have to wait at least till tomorrow :o

[Axel Foley]

Can I have a screenshot of your settings?
Btw the usergroupid of mods is usually 7, not 80.

@Axel Foley, sorry, I didn't find the time to add the setting today, so you 'll have to wait at least till tomorrow :o

Lea, don't worry and take all the time you want, it's August and I'm in vacation so I'm very relaxed in this period...:D

Thank you again for adding my requested option. :)

[MrD]

Hi Michelle,
my Modgroupid is 80
If i had Vb 2.x we delete the original group, and make a new one.
this is now the 80

68482

[Ryuk]

70th post reserved..

NVM I Had to do that lol xD, GREAT mod, thanks michelle *clicks install*

[Lea Verou]

Hi Michelle,
my Modgroupid is 80
If i had Vb 2.x we delete the original group, and make a new one.
this is now the 80

68482
Does this happen with all your mods?
Also, do these moderation actions appear normally in the moderator log (vBulletin's one) ?

[MrD]

Hello Michelle,
Yes, it´s by all my Mod´s.
the Log in the ACP is correct.

Threads/Post from a Mod, editing by another Mod oder admin where not displayed by the Mod who write the Post/thread.

[Lea Verou]

Threads/Post from a Mod, editing by another Mod oder admin where not displayed by the Mod who write the Post/thread.

I didn't understand that.
Write it in german, I'll have my boyfriend translate it ;)

[MrD]

Hi,
ok in German.
Wenn ein Mod einen Beitrag schreibt und dieser von einem Admin oder Mod bearbeitet wird, erscheint er nicht im Modlog von dem Beitragsersteller.

Bei den Moderatoren ist kein Modlog zu sehen, wenn ihre Beitr?ge bearbeitet werden.

Die Logfiles aus dem ACP/Modlog sind hingegen da.

Thanks :D

[Lea Verou]

Version 1.1.3
--------------------
-Added support for e-steki Featured threads (https://vborg.vbsupport.ru/showthread.php?t=155299)
-Fixed a bug with the number of the actions showed (it was greater than the one specified)
-Added option to show/hide the table when it has nothing to display (requested)
-Fixed bug: Link to forum did not work due to a typo.

[Lea Verou]

Hi,
ok in German.
Wenn ein Mod einen Beitrag schreibt und dieser von einem Admin oder Mod bearbeitet wird, erscheint er nicht im Modlog von dem Beitragsersteller.

Bei den Moderatoren ist kein Modlog zu sehen, wenn ihre Beitr?ge bearbeitet werden.

Die Logfiles aus dem ACP/Modlog sind hingegen da.

Thanks :D
Hmm that's weird. If a mod becomes a user then he sees them normally again? If a user becomes a mod he stops seeing them?
If possible, try that with a test account and tell me what happened.

[MrD]

Hi,
so i installed the actually Version.
But the Same.

If a Posting or Thread from a Moderator, edit by Admin or Mod, the Moderator who write the Post/thread became no Log over this Action.

But new Problem,
i edit one of my Threads, but this Action are not displayed too.

[Lea Verou]

Notice:
If for a usergroup, the "Show edited by note on edited messages?" setting is set to No, then the edits that this usergroup performs (given that its a moderator/admin usergroup) will not show in the User ModLog unless a reason is provided for the edit.
The reason that this behavior occurs is that vBulletin, in that case, does not store the edits in the editlog table unless they have a reason. My hack reads the post edits from the editlog table (because the moderatorlog table doesn't provide enough info in this case - which is a vB bug I reported and will be fixed in 3.6.9).
This is what caused MrD's problem.

[Freki]

vB Version: 3.6.8
Looks very nice.:up:
Is it also possible to run it under 3.6.7?

[Lea Verou]

Probably yes. You may have to add the template hooks manually though (there are instructions in the Manual for this).

[Freki]

Oh yes, now I see. Works great!:)

Installed.

[MrD]

Hi,
thx to Michelle for the great Live Support :d

[chatzworld]

hi, I am having problems with the right cods for the actions, by default it had 11,12 in it and it seems to only show closed threads in the list, I want it to show: Closed, Moved, Edited


Thanks

EDIT: Have managed to get this fixed my self :)

[Ausaudriel]

I just gotta say, this is an excellent hack. It's by far one of the most useful I've ever used, you did a wonderful job with it.

[eNforce]

This is indeed a great alternative to Mod Auto-PM and I like it much better, therefore installed!

I have a problem though, $template_hook[usercp_main_pos1] at the top of the template does nothing, but if I put $template_hook[usercp_main_pos6] at the very top it does.

No big problem as it does work this way... is there anything wrong with doing that?

[Lea Verou]

hi, I am having problems with the right cods for the actions, by default it had 11,12 in it and it seems to only show closed threads in the list, I want it to show: Closed, Moved, Edited


Thanks

EDIT: Have managed to get this fixed my self :)

Phew, one less support issue :D

I just gotta say, this is an excellent hack. It's by far one of the most useful I've ever used, you did a wonderful job with it.

Thanks! :D

This is indeed a great alternative to Mod Auto-PM and I like it much better, therefore installed!

I have a problem though, $template_hook[usercp_main_pos1] at the top of the template does nothing, but if I put $template_hook[usercp_main_pos6] at the very top it does.

No big problem as it does work this way... is there anything wrong with doing that?

I am not sure I understood correctly.
What have you set for its position in the hack's settings? It chooses the template hook according to that setting.

[under_takers]

this is really nice release, am gonna vote for this in MOTM :D

[Lea Verou]

this is really nice release, am gonna vote for this in MOTM :D
Thanks!!!!!!!!!! https://vborg.vbsupport.ru/

[Black Tiger]

Very nice hack. however I wait installing until there is a possibility to notify users about hard-deleted posts.
But compliments on this one, very nice!

[Lea Verou]

Thanks, but unless vB changes the moderation log code, its quite impossible to inform users about hard deleted posts.

-------------

Btw guys, this hack has been in the MOTM poll for September, so if you like it, you can go vote for it here (https://vborg.vbsupport.ru/showthread.php?t=156761):) Thanks in advance. :)

[COBRAws]

Congrats on the MOTM nomination, I gave my 2cents hehe

aiight, sorry to bring this subject back to discussion, but it would be really great if there was a new column called "Discuss Action" or "Contact Moderator" or something like that so if the user has any problems or doubts about the moderation task, with one simple click they could send a PM with the general details at User Modlog table and the option to add some comment as in a textarea form.

How many votes do I need for this wish to become real? lol

Thanks Michelle, really good MOD ;)

[Lea Verou]

Congrats on the MOTM nomination, I gave my 2cents hehe

aiight, sorry to bring this subject back to discussion, but it would be really great if there was a new column called "Discuss Action" or "Contact Moderator" or something like that so if the user has any problems or doubts about the moderation task, with one simple click they could send a PM with the general details at User Modlog table and the option to add some comment as in a textarea form.

How many votes do I need for this wish to become real? lol

Thanks Michelle, really good MOD ;)
Lol good idea in theory, but in reality it would be sooo annoying. I remember when we had moderation auto-pm: So many members responded complaining about the move/lock/edit etc :(

Thanks a lot for the vote! (although I'm losing :(:(:( )

[Delphiprogrammi]

hook template_groups


$only['eum_'] = 'your title here';


this will group templates

[Lea Verou]

hook template_groups


$only['eum_'] = 'your title here';


this will group templates
Thanks! And I was wondering about template groups!

[Snatch]

Is it possible to show the Modlog from another users?
If I delet a Thread from user X I would see this in his log. So i can after x day see what i done with this user.

[Masiello]

Great Hack Michelle, I'm using Moderated Forum, I hope you keep this up for a future vBulletin releases.
Also, please do it possible to inform users about hard deleted posts.
Waiting a new release for the final installation ;)

*INSTALLED*

[Lea Verou]

Great Hack Michelle, I'm using Moderated Forum, I hope you keep this up for a future vBulletin releases.
Also, please do it possible to inform users about hard deleted posts.
Waiting a new release for the final installation ;)

*INSTALLED*
Ι think that it already does inform users for hard deleted posts, if you provide a deletion reason.
Perhaps somebody else can confirm this.

PS: If you liked this mod, you can vote it for MOTM, although it will not win. The poll closes in a few hours. :)

[shipfriends]

Polu kalo! Well done! I needed this one!
panta tetoia ;)

[Lea Verou]

Polu kalo! Well done! I needed this one!
panta tetoia ;)
na sai kala ;)

[shipfriends]

found a potetnial "flaw"
a reported post which goes automatically in my private reporting section/fora if edited on the title or anywhere else, it shows on this...which is not ideal.

Is there anyway to eliminate this?

[Lea Verou]

found a potetnial "flaw"
a reported post which goes automatically in my private reporting section/fora if edited on the title or anywhere else, it shows on this...which is not ideal.

Is there anyway to eliminate this?
Have you enabled the "apply forum permissions" setting?

[shipfriends]

yes I had.
when a post is reported, a post is appearing inside the mods forum (restricted)

When we were changing the title of this post and where the post was placed, this info was shown on the simple user panel.

[Snake]

Thanks! Will install soon...

[pipin]

Does this hack work with vB 3.7 ?

[redlabour]

Does this hack work with vB 3.7 ?

Same Question from me ....

[Za4a Tuner]

downloaded -> tested => CLICK INSTALL
Many thanks for this add-on -> i love it!

The only thing i don't like is a little stylingerror.
If there are no mod-actions to show, but the notifcation is shown,
the background is not defined and the text is only in the first col =>
http://img151.imageshack.us/img151/4317/estickyorios8.th.jpg (http://img151.imageshack.us/my.php?image=estickyorios8.jpg&s=1)

i fixed this, see the screenshot =>
http://img151.imageshack.us/img151/9095/estickyfixedzg4.th.jpg (http://img151.imageshack.us/my.php?image=estickyfixedzg4.jpg&s=1)

If anyone else want to to this, search for
<td>$vbphrase[eum_noactions]</td>
and replace it by
<if condition="$vboptions[eum_showmod]">
<td class="alt1" colspan="5">$vbphrase[eum_noactions]</td>
<else />
<td class="alt1" colspan="4">$vbphrase[eum_noactions]</td>
</if>with this little modifikation the text is displayed over the whole row and the background-color is set to "First Alternating Color" (alt1)


kr Chris

[Fire112]

Must one change there templates? Has installed tms

[Za4a Tuner]

no, the MOD uses Plug-Ins / templatehooks.
But you have ti use vB3.6.8 ... either the hooks will not be found.

[Boothby]

maxXximum (http://www.vbulletin-germany.org/member.php?u=196) from vBGo reported this SQL-error-message (http://www.vbulletin-germany.org/showpost.php?p=12934&postcount=5).Database error in vBulletin 3.7.0 Beta 5:

Invalid SQL:

SELECT
modtable.usergroupid as modgroup,
modtable.username as moderator,
editlog.postid as postid,
editlog.reason as reason,
editlog.dateline as dateline,
editlog.userid as modid,
post.threadid as threadid,
forum.forumid as forumid,
thread.title as threadtitle,
forum.title as forumtitle,
post.title as action
FROM vb7editlog as editlog
LEFT JOIN vb7post as post ON (post.postid = editlog.postid)
LEFT JOIN vb7thread AS thread ON (thread.threadid = post.threadid)
LEFT JOIN vb7user AS modtable ON (modtable.userid = editlog.userid)
LEFT JOIN vb7forum AS forum ON (forum.forumid = thread.forumid)
WHERE
post.userid = 3 AND post.userid != editlog.userid AND 1203889380-editlog.dateline <86400 AND modtable.usergroupid IN ()
ORDER BY editlog.dateline DESC
LIMIT 10;

MySQL Error : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ')
ORDER BY editlog.dateline DESC
LIMIT 10' at line 19
Error Number : 1064 I think that happens when $vbulletin->options['eum_groups'] is empty.

[CNBAforo]

In the case of deleted messages/threads, the reason and the deleted content, could be shown in some way to the user, for him to associate the infraction with the content.

[Spinball]

I know this mod is flagged as unsupported, but I want to report an issue with it which I hope Michelle will look in to.
We have a large forum and are experiencing serious SQL slow downs with this query:
# Query_time: 11 Lock_time: 0 Rows_sent: 10 Rows_examined: 23956866
SELECT
modtable.username as moderator,
modtable.usergroupid as modgroup,
modlog.userid as modid,
modlog.action as action,
modlog.type as type,
modlog.dateline as dateline,
modlog.threadid as threadid,
modlog.postid as postid,
forum.forumid as forumid,
thread.title as threadtitle,
forum.title as forumtitle,
deletionlog.reason as delreason
FROM moderatorlog AS modlog
LEFT JOIN user AS modtable ON (modtable.userid = modlog.userid)
LEFT JOIN thread AS thread ON (thread.threadid = modlog.threadid)
LEFT JOIN post AS post ON (post.postid = modlog.postid)
LEFT JOIN forum AS forum ON (forum.forumid = thread.forumid)
LEFT JOIN deletionlog AS deletionlog ON (deletionlog.primaryid = IF(deletionlog.type = 'post', modlog.postid, modlog.threadid))
WHERE
IF(modlog.postid,post.userid=28735,thread.postuser id=28735) AND modlog.type !=20 AND modtable.userid != 28735 AND modlog.type NOT IN (11,12) AN$
ORDER BY dateline DESC
LIMIT 10;
23 million rows examined!!! This mod is grinding our forum to a halt.
Is there an alternative, more efficient way of doing this? I have had to disable the mod until a fix is found, and I would suggest that anyone with a big forum check their SQL performance when using this.

[Lea Verou]

Unless somebody else thinks of a way to fix this, personally I am unable to think of a most efficient query.
Sorry. :/

[Spinball]

Unless somebody else thinks of a way to fix this, personally I am unable to think of a most efficient query.
Sorry. :/
Thanks for the quick reply. Might splitting it into separate queries not be easier on the database?
[Edit : I have added an index on moderatorlog.userid and have re-enabled to see whether that has any effect. It should do, I'm guessing and hoping.]
[Edit 2: Nope, still having problems - disabling.]

[J98680Bxxxxx]

Installed (also marked) on vB 3.7 CR2, works fine. :up: Thanks Michelle.

[Spinball]

Michelle, does this mod only report on certain types of moderator actions?
I ask because it is, by the looks of it, reporting checked posts from this mod:
https://vborg.vbsupport.ru/showthread.php?t=173609

[Konstantinos]

it doesnt work for posts moved to another thread

[Lea Verou]

it doesnt work for posts moved to another thread
It does, but it incorrectly notifies the thread author instead of the post authors.
Its a known bug that I will fix sometime, but I don't know when...

[shadowevil]

Does this hack work with vB 3.7 GOLD ??

[djilou]

Does this hack work with vB 3.7 GOLD ??

Same question here?

[Fraxter]

Why is the feature "delete threads and posts" not available? I need this. Any other modification who can do this?

regards

[TaBsiCore]

Same question here?

I installed it on a fresh 3.7 installation => Works perfect!

[Elenna]

Works great on 3.7.1. Thanks so much!! One thing that confused me when testing was the Use Forum Permissions... I was expecting to see something and didn't, because of that option... so I disabled it, and voila! :)

Great addition!

[ANGEL OF FIRE]

vBulletin 3.7.1

Does not work at addition ID 31

31 => 3 /*posts_copied_to_x */,

Datenbankfehler in vBulletin 3.7.1:

Invalid SQL:

SELECT
modtable.username as moderator,
modtable.usergroupid as modgroup,
modlog.userid as modid,
modlog.action as action,
modlog.type as type,
modlog.dateline as dateline,
modlog.threadid as threadid,
modlog.postid as postid,
forum.forumid as forumid,
thread.title as threadtitle,
forum.title as forumtitle,
deletionlog.reason as delreason
FROM moderatorlog AS modlog
LEFT JOIN user AS modtable ON (modtable.userid = modlog.userid)
LEFT JOIN thread AS thread ON (thread.threadid = modlog.threadid)
LEFT JOIN post AS post ON (post.postid = modlog.postid)
LEFT JOIN forum AS forum ON (forum.forumid = thread.forumid)
LEFT JOIN deletionlog AS deletionlog ON (deletionlog.primaryid = IF(deletionlog.type = 'post', modlog.postid, modlog.threadid))
WHERE
IF(modlog.postid,post.userid=1,thread.postuserid=1 ) AND modlog.type !=20 AND modlog.type NOT IN (5,) AND 1212884825-modlog.dateline <86400 AND modtable.usergroupid IN (5,6,7)
ORDER BY dateline DESC
LIMIT 4;

MySQL-Fehler : You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near ') AND 1212884825-modlog.dateline <86400 AND modtable.usergroupid IN (5,6,7)
' at line 21
Fehler-Nr. : 1064
Fehler-Zeit : Sunday, 08.06.2008 @ 00:27:05
Datum : Sunday, 08.06.2008 @ 00:27:05
Skript : http://www.xxxxxx.com/usercp.php?
Referrer : http://www.xxxxx.com/forum.php
IP-Adresse : xxxxxxxxxxxx
Benutzername : ANGEL OF FIRE
Klassenname : vB_Database
MySQL-Version : 5.0.54-log

[GriZzm0]

I know this mod is flagged as unsupported, but I want to report an issue with it which I hope Michelle will look in to.
We have a large forum and are experiencing serious SQL slow downs with this query:

23 million rows examined!!! This mod is grinding our forum to a halt.
Is there an alternative, more efficient way of doing this? I have had to disable the mod until a fix is found, and I would suggest that anyone with a big forum check their SQL performance when using this.

I noticed this aswell. The usercp takes ages to load while I got this mod enabled.

[jawatkin]

I know this mod is flagged as unsupported, but I want to report an issue with it which I hope Michelle will look in to.
We have a large forum and are experiencing serious SQL slow downs with this query:

23 million rows examined!!! This mod is grinding our forum to a halt.
Is there an alternative, more efficient way of doing this? I have had to disable the mod until a fix is found, and I would suggest that anyone with a big forum check their SQL performance when using this.

Ditto here... Same query.. Here's mine and I'm disabling this pronto. Took me a few hours to figure it out... but I'm seeing horrible locking issues!!!


# Time: 080624 20:19:30
# Query_time: 22 Lock_time: 11 Rows_sent: 10 Rows_examined: 6977723
SELECT
modtable.username as moderator,
modtable.usergroupid as modgroup,
modlog.userid as modid,
modlog.action as action,
modlog.type as type,
modlog.dateline as dateline,
modlog.threadid as threadid,
modlog.postid as postid,
forum.forumid as forumid,
thread.title as threadtitle,
forum.title as forumtitle,
deletionlog.reason as delreason
FROM moderatorlog AS modlog
LEFT JOIN user AS modtable ON (modtable.userid = modlog.userid)
LEFT JOIN thread AS thread ON (thread.threadid = modlog.threadid)
LEFT JOIN post AS post ON (post.postid = modlog.postid)
LEFT JOIN forum AS forum ON (forum.forumid = thread.forumid)
LEFT JOIN deletionlog AS deletionlog ON (deletionlog.primaryid = IF(deletionlog.type = 'post', modlog.postid, modlog.threadid))
WHERE
IF(modlog.postid,post.userid=15234,thread.postuser id=15234) AND modlog.type !=20 AND modtable.userid != 15234 AND modlog.type NOT IN (11,12,29) AND 1214353145-modlog.dateline <2592000 AND modtable.usergroupid IN (5,6,7)
ORDER BY dateline DESC
LIMIT 10;

[Alphawolf83]

Is there a known german translation for this hack? :)

[sheefeh]

Installed, Thanks a lot :) great work :up:

[stonner]

does this hack work with vB 3.8.3?

[Leo Brazil]

I've been using this mod since 3.6 and all over 3.7 and 3.8....

I really wish to see it ported to 4.0

It's a great piece of work.

[redlabour]

Anyone working on a 4.0 Port?

[Leo Brazil]

It doesn't work on 4.0, style, templates, hooks changed a lot from vB3 to 4.
Too bad as this mod is really great.

[farsgsm]

i recently updated my vb to 3.8.4 but see some error while editing posts.
should i reinstall this hack? or it won't work on 3.8.4 at all.

error log:

Warning: include_once([path]/includes/class_autopm_checker.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 1

Warning: include_once() [function.include]: Failed opening '[path]/includes/class_autopm_checker.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 1

Warning: include_once([path]/includes/class_autopm_parser.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 2

Warning: include_once() [function.include]: Failed opening '[path]/includes/class_autopm_parser.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 2

Warning: include_once([path]/includes/functions_autopm.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 3

Warning: include_once() [function.include]: Failed opening '[path]/includes/functions_autopm.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 3

Fatal error: Call to undefined function mod_autopm() in /home/farsgsmc/public_html/editpost.php(638) : eval()'d code on line 5

[farsgsm]

i also reinstalled the mod, but got same result

[Lea Verou]

i recently updated my vb to 3.8.4 but see some error while editing posts.
should i reinstall this hack? or it won't work on 3.8.4 at all.

error log:

Warning: include_once([path]/includes/class_autopm_checker.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 1

Warning: include_once() [function.include]: Failed opening '[path]/includes/class_autopm_checker.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 1

Warning: include_once([path]/includes/class_autopm_parser.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 2

Warning: include_once() [function.include]: Failed opening '[path]/includes/class_autopm_parser.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 2

Warning: include_once([path]/includes/functions_autopm.php) [function.include-once]: failed to open stream: No such file or directory in [path]/editpost.php(638) : eval()'d code on line 3

Warning: include_once() [function.include]: Failed opening '[path]/includes/functions_autopm.php' for inclusion (include_path='.:/usr/lib/php:/usr/local/lib/php') in [path]/editpost.php(638) : eval()'d code on line 3

Fatal error: Call to undefined function mod_autopm() in /home/farsgsmc/public_html/editpost.php(638) : eval()'d code on line 5

This has nothing to do with my hack. I don't use any mod_autopm() function nor do I include such a file.

[MoRa GFX]

Is there one for vB4.0.1?

[MrD]

Well,
i used it in vb3.8.x and would like it, to see it for vb 4.x.x

[yahooooh]

update version for vb4 plz

[MrD]

Hi,
i push it, and asked for an VB4 versin.

[Leo Brazil]

Yeah, I really miss this one on my vB4.

[ka81]

can anyone point me to the same hack for vB4 ??

Thanx!