Super PM (Mass PM)

[tpearl5]

Any idea on how to get this to work using filters on 'User Profile Fields' ?

[simalert]

How can I prevent people from replying to the mass PMs? It's annoying to have to go through those everyday.

I just put in bold red letters at the bottom of the PMs

** This is an automatic PM, replies to this PM will NOT be received **

which seems to work and people don't reply

[simalert]

I've discovered that I sang the praises of this mod a little too quickly.

I am using vBulletin 3.6.4 and have 8825 members at the time of typing this. When trying to send PMs to them all it only sends to a fraction of them. If the counter is set to send in batches of 500 then it only sends 500 and nothing more. If I set it higher, it sends about 1,000 before stopping.

So it's sort of working for me on 3.6.4, but not properly.

[stinger2]

aha...............at last you saw it...............wel people are crying for months now.......but unfortunatly no one is hearing...

[simalert]

Well however makes a decent fully working mass PM mod for 3.6.4 onwards will be popular and could even make quite a bit of money from it if they made it chargable like the many mods that have lite and full versions knocking about. It seems demand for this sort of thing is all over the net yet nobody has come up with anything since 3.5.x

[PoetJA-1975]

Well however makes a decent fully working mass PM mod for 3.6.4 onwards will be popular and could even make quite a bit of money from it if they made it chargable like the many mods that have lite and full versions knocking about. It seems demand for this sort of thing is all over the net yet nobody has come up with anything since 3.5.x

Oh if I only had a code...
inspiration from the movie: Wizard of Oz
https://vborg.vbsupport.ru/

[DannyITR]

Well that sucks. This is the second mass PM hack I install that doesn't work.

[Tralala]

Well however makes a decent fully working mass PM mod for 3.6.4 onwards will be popular and could even make quite a bit of money from it if they made it chargable like the many mods that have lite and full versions knocking about. It seems demand for this sort of thing is all over the net yet nobody has come up with anything since 3.5.x

This just in:
https://vborg.vbsupport.ru/showthread.php?t=141622

[Obi Wan]

gibt es hier zu eine neues Update ?

[cdembek]

Not sure why the following aren't being cached

Uncached templates: editor_clientscript (1)
Uncached templates: editor_jsoptions_font (1)
Uncached templates: editor_jsoptions_size (1)
Uncached templates: editor_smilie (15)
Uncached templates: editor_smiliebox (1)
Uncached templates: editor_smiliebox_row (5)
Uncached templates: editor_toolbar_on (1)
Uncached templates: forumrules (1)
Uncached templates: newpost_disablesmiliesoption (1)
Uncached templates: pm_newsuperpm (1)
Uncached templates: posticonbit (14)
Uncached templates: posticons (1)

It appears to be cached in the super PM file..

// pre-cache templates used by specific actions
$actiontemplates = array(
'newsuperpm' => array(
'pm_newsuperpm',
'editor_clientscript',
'editor_jsoptions_font',
'editor_jsoptions_size',
'editor_smilie',
'editor_smiliebox',
'editor_smiliebox_row',
'editor_toolbar_off',
'editor_toolbar_on',
'newpost_disablesmiliesoption',
'editor_smiliebox_straggler',
'posticonbit',
'posticons',
),
'trackpm' => array(
'pm_trackpm',
'pm_receipts',
'pm_receiptsbit',
),
'messagelist' => array(
'pm_messagelist',
'pm_messagelist_periodgroup',
'pm_messagelistbit',
'pm_messagelistbit_user',
'pm_messagelistbit_ignore',
)
);

Anyone??

[cdembek]

I now get this message..

Database error in vBulletin 3.5.4:

Invalid SQL:
INSERT INTO pm (pmtextid, userid, folderid, messageread) VALUES (1295, 6, 0, 0), (1295, 7, 0, 0), (1295, 9, 0, 0), (1295, 10, 0, 0), (1295, 11, 0, 0), (1295, 12, 0, 0), (1295, 13, 0, 0), (1295, 14, 0, 0), (1295, 15, 0, 0), (1295, 16, 0, 0), (1295, 18, 0, 0), (1295, 19, 0, 0), (1295, 20, 0, 0), (1295, 21, 0, 0), (1295, 22, 0, 0), (1295, 23, 0, 0), (1295, 24, 0, 0), (1295, 25, 0, 0), (1295, 26, 0, 0), (1295, 27, 0, 0), (1295, 28, 0, 0), (1295, 29, 0, 0), (1295, 30, 0, 0), (1295, 31, 0, 0), (1295, 32, 0, 0), (1295, 33, 0, 0), (1295, 34, 0, 0), (1295, 35, 0, 0), (1295, 36, 0, 0), (1295, 37, 0, 0), (1295, 38, 0, 0), (1295, 39, 0, 0), (1295, 40, 0, 0), (1295, 41, 0, 0), (1295, 42, 0, 0), (1295, 43, 0, 0), (1295, 44, 0, 0), (1295, 45, 0, 0), (1295, 46, 0, 0), (1295, , 0, 0), (1295, 49, 0, 0), (1295, 50, 0, 0), (1295, 51, 0, 0), (1295, 52, 0, 0), (1295, 53, 0, 0), (1295, 54, 0, 0), (1295, 55, 0, 0), (1295, 56, 0, 0), (1295, 57, 0, 0), (1295, 58, 0, 0), (1295, 59, 0, 0), (1295, 60, 0, 0), (1295, 61, 0, 0), (1295, 62, 0, 0), (1295, 63, 0, 0), (1295, 64, 0, 0), (1295, 65, 0, 0), (1295, 66, 0, 0), (1295, 67, 0, 0), (1295, 68, 0, 0), (1295, 69, 0, 0), (1295, 70, 0, 0), (1295, 71, 0, 0), (1295, 72, 0, 0), (1295, 73, 0, 0), (1295, 74, 0, 0), (1295, 75, 0, 0), (1295, 76, 0, 0), (1295, 77, 0, 0), (1295, 78, 0, 0), (1295, 79, 0, 0), (1295, 80, 0, 0), (1295, 81, 0, 0), (1295, 82, 0, 0), (1295, 83, 0, 0), (1295, 84, 0, 0), (1295, 85, 0, 0), (1295, 86, 0, 0), (1295, 87, 0, 0), (1295, 88, 0, 0), (1295, 89, 0, 0), (1295, 91, 0, 0), (1295, 92, 0, 0), (1295, 93, 0, 0), (1295, 94, 0, 0), (1295, 95, 0, 0), (1295, 96, 0, 0), (1295, 97, 0, 0), (1295, 98, 0, 0), (1295, 99, 0, 0), (1295, 100, 0, 0), (1295, 102, 0, 0), (1295, 103, 0, 0), (1295, 104, 0, 0), (1295, 105, 0, 0), (1295, 106, 0, 0), (1295, 107, 0, 0), (1295, 109, 0, 0), (1295, 110, 0, 0), (1295, 111, 0, 0);

MySQL Error : You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near ' 0, 0), (1295, 49, 0, 0), (1295, 50, 0, 0), (1295, 51, 0, 0), (
Error Number : 1064

[DjTaz]

I now get this message..

Database error in vBulletin 3.5.4:

Invalid SQL:
INSERT INTO pm (pmtextid, userid, folderid, messageread) VALUES (1295, 6, 0, 0), (1295, 7, 0, 0), (1295, 9, 0, 0), (1295, 10, 0, 0), (1295, 11, 0, 0), (1295, 12, 0, 0), (1295, 13, 0, 0), (1295, 14, 0, 0), (1295, 15, 0, 0), (1295, 16, 0, 0), (1295, 18, 0, 0), (1295, 19, 0, 0), (1295, 20, 0, 0), (1295, 21, 0, 0), (1295, 22, 0, 0), (1295, 23, 0, 0), (1295, 24, 0, 0), (1295, 25, 0, 0), (1295, 26, 0, 0), (1295, 27, 0, 0), (1295, 28, 0, 0), (1295, 29, 0, 0), (1295, 30, 0, 0), (1295, 31, 0, 0), (1295, 32, 0, 0), (1295, 33, 0, 0), (1295, 34, 0, 0), (1295, 35, 0, 0), (1295, 36, 0, 0), (1295, 37, 0, 0), (1295, 38, 0, 0), (1295, 39, 0, 0), (1295, 40, 0, 0), (1295, 41, 0, 0), (1295, 42, 0, 0), (1295, 43, 0, 0), (1295, 44, 0, 0), (1295, 45, 0, 0), (1295, 46, 0, 0), (1295, , 0, 0), (1295, 49, 0, 0), (1295, 50, 0, 0), (1295, 51, 0, 0), (1295, 52, 0, 0), (1295, 53, 0, 0), (1295, 54, 0, 0), (1295, 55, 0, 0), (1295, 56, 0, 0), (1295, 57, 0, 0), (1295, 58, 0, 0), (1295, 59, 0, 0), (1295, 60, 0, 0), (1295, 61, 0, 0), (1295, 62, 0, 0), (1295, 63, 0, 0), (1295, 64, 0, 0), (1295, 65, 0, 0), (1295, 66, 0, 0), (1295, 67, 0, 0), (1295, 68, 0, 0), (1295, 69, 0, 0), (1295, 70, 0, 0), (1295, 71, 0, 0), (1295, 72, 0, 0), (1295, 73, 0, 0), (1295, 74, 0, 0), (1295, 75, 0, 0), (1295, 76, 0, 0), (1295, 77, 0, 0), (1295, 78, 0, 0), (1295, 79, 0, 0), (1295, 80, 0, 0), (1295, 81, 0, 0), (1295, 82, 0, 0), (1295, 83, 0, 0), (1295, 84, 0, 0), (1295, 85, 0, 0), (1295, 86, 0, 0), (1295, 87, 0, 0), (1295, 88, 0, 0), (1295, 89, 0, 0), (1295, 91, 0, 0), (1295, 92, 0, 0), (1295, 93, 0, 0), (1295, 94, 0, 0), (1295, 95, 0, 0), (1295, 96, 0, 0), (1295, 97, 0, 0), (1295, 98, 0, 0), (1295, 99, 0, 0), (1295, 100, 0, 0), (1295, 102, 0, 0), (1295, 103, 0, 0), (1295, 104, 0, 0), (1295, 105, 0, 0), (1295, 106, 0, 0), (1295, 107, 0, 0), (1295, 109, 0, 0), (1295, 110, 0, 0), (1295, 111, 0, 0);

MySQL Error : You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near ' 0, 0), (1295, 49, 0, 0), (1295, 50, 0, 0), (1295, 51, 0, 0), (
Error Number : 1064

You have a problem with either your SQL database or the script trying to generate the INSERT. You have a number missing somewhere - possibly a usernumber

[sabret00the]

If i get permission off of the author i'll port it to 3.6.x

[CP,]

Hi there i am sending bulk emails and i have sent a few now via my forum.

I then came to send more bulk pm's to another group which are around 900 members. It shows me this error message:

Fatal error: Unable to proceed with save while $errors array is not empty in class vb_datamanager_pm in /includes/class_dm.php on line 758

does anybody know whats wrong...?

Cheers!

[erdiyilmaz]

is this works under v3.6.7-PL ?

[USAMustangs.com]

There is any coder thats make this hack for vb 3.6.5
that would be nice

[Tralala]

"Super PM" doesn't show up for me under AdminCP -> Users.

I've tried clearing cache and also tried a 2nd browser.

But the page *does* come up when I manually go to http://www.myforum.com/admincp/adminsuperpm.php

otherwise seems to be running okay in vBull 3.6.5.

How can I get the settings to show up in AdminCP?

[sabret00the]

hey folks. i did get permission to port this but i haven't had a chance to do so yet. sorry for the delay.

[USAMustangs.com]

hey folks. i did get permission to port this but i haven't had a chance to do so yet. sorry for the delay.

awesome!

keep us posted.

[Tralala]

Awesome sabret00the... and thanks for keeping us updated!

[Tralala]

Grrrrr. I've got this installed. I have to manually type in the URL to get to the admin settings since it doesn't show up in AdminCP. But I forge ahead and set it up for a few users anyway. Seems to be working fine...

But then,... I create a PM -- preview which users it'll get sent to, looks good -- and then click "confirm & send"...

...and then get this:

The following errors occurred when this message was submitted:
Invalid recipient username. Please press the back button, enter the correct username and try again. Click Here to See the Members List



:(


So close and yet so far (on vB 3.6.5.)

This would be perfect for my small forum, as we're looking to put the nail in the coffin on an old mailing list used for announcements.

I'd love to see this ported. The bones seem solid.

I'd also love for a way to grant this access to all users, automatically by default (perhaps with a permission-based control, or a way to turn it off for a few abusers.)

In the absence of that, are there any other "mass PM" (or mass email) mods that can work on vBulletin 3.6.x from within the standard member's forum interface (and not via AdminCP?)

I really need one, and I'm surprised there's not much more demand for such a basic thing.

[FCS-Webmaster]

Is there any working update for 3.6.8?!

[inshad]

is there any updates for this Plugins in order to work with version 3.6.x

or any smilier hack that provide a selected member to user this feature ?

[Nomar86]

very nice plugin, installed it and it shows up right !

Can't wait to use it for the first time :)

Thanks again!

it is not working:

Invalid recipient username. Please press the back button, enter the correct username and try again. Click Here to See the Members List

a shame :(

[sawatdee]

Thank you Sabret00the! We love your work.

This works great in 3.68, I think you all just missed the update back on page 14 (https://vborg.vbsupport.ru/showpost.php?p=1082084&postcount=204)?:)

On a side note I have a really good question. I have read through all 19 pages of this and nobody has asked this. We have staff of 14 members rather than manually adding and removing members from the options is there a way to simply add a usergroup ?

[indie2industry]

Thank you Sabret00the! We love your work.

This works great in 3.68, I think you all just missed the update back on page 14 (https://vborg.vbsupport.ru/showpost.php?p=1082084&postcount=204)?:)

On a side note I have a really good question. I have read through all 19 pages of this and nobody has asked this. We have staff of 14 members rather than manually adding and removing members from the options is there a way to simply add a usergroup ?

i couldnt agree more...
This is REALLY NICE:up::D

[GTX2]

i was trying to send to all registered members (about 30.000 users) and got a blank page. If i send just to few users it goes OK.... :s

[Andy92]

Hey,

I have installed this on vBulletin 3.7 beta 6, and all is working great.

But when i type out my message, and then click count, it works great. But then i click submit message and it comes up with an error message saying...

Invalid recipient username. Please press the back button, enter the correct username and try again. Click Here to See the Members List

Now i know it wasnt built for 3.7, but can someone help me, because this is the BEST mass pm i have seen, and i have used loads of different ones!

[cagbaazee]

Hi, in hv install it and send pm as test, but it doesnot appear in any username. what is wrong.. please explain how to resolve it. thanks

[dtdesign]

Use the fix on Page 14 - working fine for me after doing this on 3.6.8

Thanks again !

[baymortgage99]

Nice hack

[taheri6]

Anyone want to port to 3.7?

[Aquestor]

I am also interested in using this Hack in 3.7 i love it

[sylar]

Works for me with the fix on page 14 now but Im getting some memory errors when I try to send to more than 1200 users. No biggie as I with the options I can split them.

[sbarbz]

error in send super Message :
Invalid recipient username. Please press the back button, enter the correct username and try again. Click Here to See the Members List
How to arrange?

[Deyth]

Does this work with 3.7?

[sbarbz]

Does this work with 3.7?
yes :D

[RedTrinity]

I'm having this problem when trying to send a mass PM to multiple usergroups....

The following errors occurred with your submission:

1. The following users were not found:
1. zac&amp
2. amp
3. kiarahsmum
4. m&amp
5. amp
6. m
7. cj&amp
8. amp
9. lk'smum
10. josh&amp
11. amp
12. hayleysmum
13. twins&amp
14. more
15. Konah&amp
16. amp
17. Tainesmummy
18. Lisa&amp
19. amp
20. Liam
21. claudsmum&amp
22. amp
23. bump
24. Mitch&amp
25. amp
26. Sam
27. mum&amp
28. amp
29. nan
30. Zac&amp
31. amp
32. beck&amp
33. amp
34. 2more
35. kim&amp
36. amp
37. ella
38. mum2mac&amp
39. amp
40. indi
41. Jo&amp
42. amp
43. Ryan
44. mum2B&amp
45. amp
46. T
47. W&amp
48. D'sMama
49. j&amp
50. a_mummy

This seems to be for members who have an "&" symbol in their name.... :confused:

[Mum]

Doesn't seem to work on 3.7 for me - when you import xml you get 'Invalid File Specified'

[joseduddy]

Just installed this wonderful mod. Install was flawless. But when I go to send here is the message I get. ( This is with the Registered Users check off )

Invalid recipient username. Please press the back button, enter the correct username and try again. Click Here to See the Members List
How to arrange?

I know others are having same problem. I uploaded the page 14 fix.. still not working..running 3.7.0

If I just check off Admin, all works fine. I have 2 admins and it returns a statement pm will be sent to 2 recipts.

Any suggestions?

[Jari37]

I've installed this, and it's working perfectly (other than the issue with users with & in their names). It's saved me a lot of time and hassle, so thanks a lot to msgotit, your hard work is much appreciated.

[dutchbb]

Will this work for boards with +50000 members? (trying to mass pm most of them).

[dutchbb]

I tried sending a pm and i get "invalid recipient username blablabla" ?

Does this work with 3.7?
No it does not.

Can this be updated for 3.7 please?

[n8td]

It works fine for 3.7 if you use Stoebi's updated superpm.php file. The only problem is the UCP navigation on the left side is messed up for me. Anyone know how to fix that?

https://vborg.vbsupport.ru/showthread.php?p=1085543#post1085543

EDIT:

I fixed the UCP navigation issue.

In superpm.php find:
$phrasegroups = array('posting', 'postbit', 'pm');

Replace with:
$phrasegroups = array('posting', 'postbit', 'pm', 'user');

[Hamednet]

please upldate For VB 3.7.x

[Simon Lloyd]

Usernames issue is discussed and sorted here! (https://vborg.vbsupport.ru/showpost.php?p=1085543&postcount=219)

[malekitto]

hi all ,
i just installed it on 3.7 and it works fine.

just one question ; i set the Email notification on , but that mail is plain text only.
i searched for some HTML notification plugin .. but the problem is that the Pm is written with BBCODE.

so is there something that allow me to have HTML notification of this SuperPM ?

thanks all.

[chuanjer]

I cant seem to locate the PM option on the admincp sidebar.I guess I have to enable it on the vb options? Or is admincp send PM a plugin which is not in the default 3.6.8 installation.
Cheers

[i156]

I cant seem to locate the PM option on the admincp sidebar.I guess I have to enable it on the vb options? Or is admincp send PM a plugin which is not in the default 3.6.8 installation.
Cheers

Same here. I don't see any options for it.

[i156]

Located the options by typing in the url. I ran it once and got an invalid username error. Then I updated the superpm.php from an earlier post, ran it again and got a blank page.

[n8td]

Same here. I don't see any options for it.

Are you talking about the AdminCP settings for who can send PMs or the page to send PMs? If you want to send a PM, you can do it via the UserCP. Hope that helped.

Located the options by typing in the url. I ran it once and got an invalid username error. Then I updated the superpm.php from an earlier post, ran it again and got a blank page.

Did you download this file?

https://vborg.vbsupport.ru/showpost.php?p=1085543&postcount=219

[i156]

Yes to question 1, it isn't showing up in the admin but I got to it by typing in the url.

And yes, I downloaded that file and ran it and got a blank page.

[blackberry]

showing this error message
"!!!!!s0n0!!!!! has chosen not to receive private messages or may not be allowed to receive private messages. Therefore you may not send your message to him/her.

If you are trying to send this message to multiple recipients, remove !!!!!s0n0!!!!! from the recipient list and send the message again."

using 3.7.3 vb

[flup]

It works fine for 3.7 if you use Stoebi's updated superpm.php file. The only problem is the UCP navigation on the left side is messed up for me. Anyone know how to fix that?

https://vborg.vbsupport.ru/showthread.php?p=1085543#post1085543

EDIT:

I fixed the UCP navigation issue.

In superpm.php find:
$phrasegroups = array('posting', 'postbit', 'pm');

Replace with:
$phrasegroups = array('posting', 'postbit', 'pm', 'user');

This is the solution for 3.7.2, works perfect.

[Pokerbanter]

Yes to question 1, it isn't showing up in the admin but I got to it by typing in the url.

And yes, I downloaded that file and ran it and got a blank page.

No options for me either. When I browse to page it tells me I don't have sufficient privileges :S

[n8td]

No options for me either. When I browse to page it tells me I don't have sufficient privileges :S

Did you upload all necessary files?

[blackberry]

uninstalled

[W!cKeD]

Work this with 3.8.2?

[students_forum]

This looks interesting.
I'll have a closer look later :) on 3.7.

[ladiimystic]

hey =)

Does this work with version 3.8.x?

please and thanks =)

[EagleNick]

hey =)

Does this work with version 3.8.x?

please and thanks =)
Use this one: https://vborg.vbsupport.ru/showthread.php?t=141622

[Joep11]

This add-on is not working on vb4...is that correct? Anyone knows how to make it work on vb4?

[XGC Paravain]

Will this work with 4.2 and im looking for a super pm that will allow the leader of a usergroup to be able to spam out a message to the entire usergroup